Filter
Top Products
54
1. Red Indicator Lights when any button is pressed.
2. TV, VCR, DVD, SAT/CBL Selects product to be
operated.
3. POWER Turns product On or Off.
4. SLEEP Turns off the TV after a period of 1 to 99
minutes.
5. VOLUME UP/DOWN Changes the volume level of the
product, normally the TV.
6. INFO Displays/selects on-screen channel information,
etc. MENU Access the Menu functions of the device you
are controlling.
7. RECORD, PLAY, STOP, REW, FF, PAUSE
VCR control buttons operate your VCR even when the
remote is set to operate the TV. Also operates DVD Scan
-/+.
8. ENTER Used after direct channel number entry to
immediately change to the selected channel.
9. INPUT For some TVs, press repeatedly to select from
available viewing sources (antenna, cable box, VCR, etc.).
10. NUMBERS Enter numbers for direct channel selection.
Some products require Enter to be pressed after channel
selection.
11. LAST Returns to the previously selected channel, or
DVD repeat toggle. EXIT Used to exit menu functions.
12. MUTE Turns off the TV sound while the picture remains.
OK Selects menu items for the device you are controlling.
13. CHANNEL UP/DOWN Changes the channels.
14. CC (SUBTITLE) TV Closed Caption (if your TV has
this feature) or DVD Subtitle toggle. The Satellite GUIDE
is accessed under the CC button when in SHIFT mode.
15. SETUP Used for setup.
16. SHIFT Press to access “shifted” functions (labeled in
Green). See page 7.
Button Functions, cont.
Button Functions
1.
2.
3.
4.
5.
6.
7.
8.
16.
15.
14.
13.
12.
11.
10.
9.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. LAST may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have LAST ability for
the LAST button to operate this feature.
12.
13.
3.
5.