Filter
Top Products
2 Press the TV key to select TV. Press the key until it lights up.
3 Keep keys s and y on the SRU 1020 pressed simultaneously
for 5 seconds until the TV key remains lit.
4 Press the y key of the SRU 1020 and keep it pressed.
– The SRU 1020 now starts emitting all known ‘TV off’ signals,one by one.
Each time a code is sent, the TV key flashes.
5 When your TV switches off (stand-by), immediately release the
y key of the SRU 1020 to confirm.
– The SRU 1020 has now found a code that works on your TV.
6 Check if you can operate all functions on your TV with the SRU 1020.
• If this is not the case, you can redo the automatic setting.
The SRU 1020 will then search for a code that perhaps works better.
– After the SRU 1020 has run through all the known codes, the search will stop automatically and the
TV key stops flashing.
– Automatic programming of a TV takes a maximum of 6 minutes. For DVD this time is 2 minutes.
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 y (Standby) . . . . . . . switches the TV on or off.
2 TV - DVD. . . . . . . . . selects TV or DVD mode.
3 E / MENU . . . . . . . TV: selects between regular (4:3) and wide screen (16:9) TV.
DVD: opens disc menu.
4 VOL – TV: reduces the TV volume.
DVD: menu navigation (cursor left).
5 5 / A . . . . . . . . . . . . . TV: favorite channel A. DVD: rewind.
2 / B . . . . . . . . . . . . . . TV: favorite channel B. DVD: play.
6 / C . . . . . . . . . . . . . TV: favorite channel C. DVD: wind.
9 / D. . . . . . . . . . . . . . TV: favorite channel D. DVD: stop.
; / E. . . . . . . . . . . . . . . TV: favorite channel E. DVD: pause.
6 ENGLISH