Filter
Top Products
2 3
This function allows individual channels to be added or deleted
from memory. Tune the desired channel by using the CHAN-
NEL UP/CHANNEL DOWN buttons or by random access, and
then press the + or - button to either add or remove a channel from memory.
This function will give a name, up to eight characters, to a channel.
Press the - button to delete any existing label. Press the + button to
activate this function. Once in modification display, a cursor will point
to the position on the label. The + and - buttons will scan through the
available characters. The RESET button will move the cursor to the next position on
the label. A total of 32 channels may be labeled.
+ ADD CHANNEL
-> DELETE xx
LABEL xx
+ MODIFY
- DELETE
Press the + button to allow the continuous display of the cur-
rent channel number. Press the - button and the channel num-
ber will appear for only a few seconds after the channel
change. It will then disappear.
+ REMINDER ON
-> REMINDER OFF
This function will determine what channel the TV will tune
to at initial turn on. Tune any channel and press the + but-
ton. The TV will tune to that channel every time it is turned
on. Press the - button and the TV will, at turn on, tune to the last channel tuned
before turn off.
+ FORCE TO CH xx
_>STD PWR ON CH
Press the + button for the “POWER FORCED ON”
mode. This disables the normal on/off control; the receiv-
er will be activated once AC power is applied. The “sleep
timer” function is disabled; the set may not be turned off except by removing power.
Press the - button for normal “POWER ON/OFF” control.
+ PWR FORCED ON
-> STD PWR ON/OFF
The “NO DISPLAYS” function disables any on-screen displays,
except the sleep timer and mute. Press the + button to activate
this function. Press the - button for standard displays.
+ NO DISPLAYS
-> STD DISPLAYS
The “TIME LIMIT” function will automatically turn off the set
if it has been on continuously for the time duration shown.
Press the + button to activate the function and set the time
limit, up to 99 hours. Press the - button for normal TV operation.
+ TIME LIMIT xx HR
-> NO TIME LIMIT
Press the + button to enable the Channel Guide feature.
Press the - button to disable the function.
+ CH GDE ENABLE
_> CH GDE DISABLE
Press the + or - button to adjust the picture to the desired level.
PICTURE
-.................+
To begin programming, press the TV SETUP button on the remote control to put the
remote into TV setup mode. Then press the POWER button to turn on the TV. Press
the SELECT button for the display access functions to appear on the screen.
Depending on the model and its features, some or all of the display functions and fea-
tures described below will be valid.
Press the + or - button to adjust the brightness to the desired
level.
BRIGHTNESS
-.................+
Press the + or - button to adjust the color to the desired level.
COLOR
-.................+
Press the + or - button to adjust the tint to the desired level.
TINT
-.................+
Press the + or - button to adjust the sharpness to the desired level.
SHARPNESS
-.................+
Press the + or - button to set the maximum volume available
from the keyboard or the Guest transmitter.
VOLUME LIMITER
-.................+
Press the + button to disable the normal functioning
of the volume control. This forces the volume to the
maximum level allowed by the volume limiter
described in the next step. In this mode, the mute function is disabled. Press the (-)
button for “standard volume up/down,” allowing normal volume control operation.
+ VOLUME FORCED MAX
->STD VOL UP/DOWN
Press the VOLUME UP or VOLUME DOWN button to
set the maximum level available. The range is made up of
63 steps from minimum to maximum.
+ SET MAX VOL xx
(VOL FORCED MAX)
Press the + or - button to choose between maximum vol-
ume or the “turn on” volume. Press the VOLUME UP or
VOLUME DOWN button to set either the maximum vol-
ume level available, or the set’s initial “turn on” volume level. There are 63 steps
between minimum and maximum.
++SET MAX VOLUME
->SET ON VOL
Press the + button to have the TV receive cable channels 1-
125, excluding channels 95, 96, and 97. Press the - button to
have the TV receive the normal off-the-air channels 2-69.
+ CABLE TUNING
-> BCST TUNING
This function allows the TV to scan all the channels and
automatically program in memory all active channels on
the system. Press the + button to activate auto pro-
gramming. Press the - button at any time to stop this function.
AUTO PROGRAMMING
+ TO BEGIN
Press the + or - button to turn Smart Sound ON or OFF.
Smart Sound allows you to preset a desired volume level that
the TV sound will not exceed.
SMART SOUND
ON/OFF
Press the + or - button to select the language
you prefer. You may choose English, Spanish
(Español), or French (Français),
LANGUAGE
ENGLISH/ESPAÑOL/FRANÇAIS
Press the + or - button to turn AV MUTE On or Off. When AV MUTE
is active, the audio is muted and the screen will be solid black or solid
blue if a clear signal is not received.
AV MUTE
ON/OFF
Press the + or - button to select YES or NO. Select YES when you are
ready to leave the on-screen menu system.
EXIT
NO/YES