Filter
Top Products
31
USING THE SURROUND SOUND EXTERNAL SPEAKER CONNECTIONS
ANT "A"
75Ω
L
AUDIO
R
AV
VIDEO
S-VIDEO 1
PIP ANT "B"
75Ω
SURROUND SOUND
88
+ R – – L +
ATTENTION - TO AVOID DAMAGE
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER.
S-VIDEO 2
out
AV2
in
AV1
in
+
-
+-
1
ANT "A"
75Ω
L
AUDIO
R
AV
VIDEO
S-VIDEO 1
PIP ANT "B"
75Ω
SURROUND SOUND
88
+ R – – L +
ATTENTION - TO AVOID DAMAGE
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER.
S-VIDEO 2
out
AV2
in
AV1
in
B
y adding optional external
speakers to the TV’s sound sys-
tem, you can create the feeling of
reflected sound that surrounds you
at a movie theater or concert hall.
Connect both external speak-
ers to the speaker wire terminals
on the TV.
Recommended speakers: 8 ohm,
15 watt minimum. Be sure the (+)
and (–) speaker wires are connect-
ed to the correct R(ight) and L(eft)
speaker terminals on the TV.
Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
Turn the TV and the
STEREO control ON.
After setup whenever a stereo sig-
nal is received the audio will be
heard in Surround Sound.
REAR SURROUND SOUND
SPEAKER TERMINALS
SMART HELP
Remember, Surround
Sound will not work with
only one speaker connected; or
with monaural audio material
(unless the Incredible Stereo fea-
ture is turned ON).
BEGIN
BACK OF TV
2
REAR SURROUND SOUND SPEAKERS
Note: The rear Surround Sound speakers will not be
heard at the same volume level as the front TV
speakers. It is intended for the rear speakers to give a
background noise effect which requires a lower vol-
ume level than the TV’s front speakers.
TV
REAR SPEAKER
REAR SPEAKER
PRIMARY VIEWING AREA