Filter
Top Products
General information
Use a TIMER programming to automatically start
and stop a recording at a later time or date.The
video recorder will switch to the right programme
number and begin recording at the correct time.
With this video recorder, you can pre-programme
up to eight recordings within a period of one
year.To make a programmed recording, your
video recorder needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
This information is saved in a 'TIMER' block.
Programming a recording
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with or .
Then press .
4.
4.Select ONCE, DAILY, or WEEKLY recording
with or .Then press
.
If any of the TIMER blocks are in use, 'FULL' will
appear on the TV screen.
5.
5.Select TIMER block with .
6.
6.With buttons you can enter 'START'
(start time) , 'STOP' (end time) , 'PROG.'
(programme number) and 'DATE'.
7.
7.When all inputs are correct, press
.The programming information
is stored in a TIMER block.
8.
8.Insert a cassette with an intact security tab
(unprotected).
9.
9.Switch off with .
The programmed recording will only function
when the video recorder is switched off with
.
STANDBY/ON
yy
STANDBY/ON
yy
STATUS/EXIT
0..9
0..9
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
EN
5. Programming a recording (TIMER)
SELECT KL CHOOSE B
→ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Selecting once/daily/weekly recordings
Use or to select from the
following options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY.': Repeated weekly recordings (every
week on the same day)
STOP C-LPLAY B-K
Programme numbers of the ' AV1 ' and ' AV2
' scart socket
You can also programme recordings from exter-
nal sources via scart socket AV1(TV)or AV2
(DECODER).
11
Switching 'Direct Record' on or off
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'RECORD SET UP' with or
and confirm with .
4.
4.In 'DIRECT RECORD', select 'OFF' (Direct
Record off) or 'ON' (Direct Record on) with
.
5.
5.To end, press .
6.
6.Switch off with .
STANDBY/ON
yy
STATUS/EXIT
FWD 1- B
FWD 1- B
STOP C-L
PLAY B-K
MENU
SELECT KL CHOOSE B
RECORD SPEED [SP]
→DIRECT RECORD [OFF]
RECORD LINK [OFF]
END=EXIT
HE474ED(EN).QX3 03.2.22 5:47 PM Page 11