Filter
Top Products
23
Why must I note the cassette number?
When searching for available recordings, you will need to insert the
corresponding cassettes (cassette numbers).
How many cassettes can I save in the Tape List?
You can store up to 9 cassettes. You can store a maximum number of 50
titles in the Tape Manager.
aI see the message 'TAPE LIST- MEMORY FULL' on the screen
b The maximum of cassettes/titles is reached. You cannot add any cassette. It
isn't possible any more to store recordings in the Tape List.
If you want to use the Tape List again, please, delete titles (recordings) or
cassettes out of the Tape List.
Editing recording titles
In the Tape List, all recordings longer than 10 minutes are displayed with cassette number,
recording title and length of recording. The TV channel, time and date are saved as a title. The
title of this recording can only be changed after the recording has been completed.
To do this, the corresponding cassette does not have to be in the video recorder. In the
following, you will read how to customise the titles to your wishes.
TAPE LIST
CASS. TITLE LENGTH
1 RECORDING 1 061 MIN
RECORDING 2 065 MIN
2 RECORDING 1 MIN
________________________________
EXITpMENU
EDITp p FINDpOK
1 Press TAPE LIST on the remote control. An overview of all saved
titles/cassettes from the Tape List appears on the screen.
aI can see the message 'TAPE LIST- MEMORY EMPTY'
b There are no recordings saved in the Tape List. Therefore, it is not
possible to add or change a title.
2 Using ;qP or P r= select the title to be edited and confirm with
P .
3 Using P or Q select the position where the letter/number/symbol
is to be changed or re-entered.
4 Change the desired symbol using ;qP or P r= .
Deleting symbols
To delete all symbols of a recording title, press CLEAR (CL) at a symbol
position.
ENGLISH
Tape List