Filter
Top Products
11
❍ On VCR
Insert a cassette with the record tab in place.
The VCR turns on.
• If a cassette is already in the VCR, turn on the
VCR.
❍ Select Channel
Press CH / or Number buttons to select the
channel to record.
• You can also use the REW/CH- and FF/
CH+ on the front panel. However, press CH before
pressing these buttons.
❍ Start OTR
Press REC/OTR ● twice.
Recording starts immediately, and the REC
indicator will blink on the display.
This indicates that the VCR
will automatically shut off after
30 minutes of recording.
❍ Select Recording Length
Press REC/OTR ● repeatedly until the desired
recording length appears.
Each time you press the button, recording length
increases in 30-minute intervals.
0:30 1:00 1:30
.....
5:30 6:00
REC (Normal recording)
To check time remaining during an OTR
Press OK/STATUS.
To change the recording length during an
OTR
Press REC/OTR ● repeatedly until the desired
length appears.
To cancel an OTR
Press STOP to stop recording before the preset
recording length is reached. If you want to cancel
the OTR mode but continue recording, press REC/
OTR ● several times until “OTR” changes to
“REC” on the TV screen.
Notes:
• During recording, the displayed time counts down. When
“0:00” is reached, recording stops and the VCR turns off
automatically.
• If an OTR is engaged during pause, the displayed time
counts down normally, but recording does not begin
until you cancel the pause.
The OTR function lets you quickly specify how
long you want a recording to continue. You do not
have to programme the timer.
Make sure....
• The record tab on the cassette is not removed.
• Your VCR, TV and antenna are connected
correctly.
❍ On TV
1 Turn on the TV.
2 Select the video channel (or AV mode).
2
3
4
5
(For VR607/55 only)
If you want to change the sound you listen to while
playing back a HiFi stereo or bilingual tape, press
AUDIO repeatedly.
Each time you press the button, the sound changes
as follows:
HiFi stereo HiFi left channel HiFi right
channel Monaural sound on normal audio track.
HIFI:
Normally select this mode.
You can play back a HiFi tape in HiFi stereo mode
and monaural tape in monaural mode.
HIFI L:
Select this mode when you want to play back the
sound recorded on HiFi left channel (usually main
language) of a bilingual programme.
HIFI R:
Select this mode when you want to play back the
sound recorded on HiFi right channel (usually
sub-language) of a bilingual programme.
NORMAL MONO:
Select this mode when you want to play back the
sound recorded on the normal audio track of the
tape.
Note:
• The connections described in “VCR to AV TV
Connection” (
✈
P.4) are required for HiFi stereo
playback.
Selecting Monitor Sound
One Touch Recording (OTR)
1
OTR(0:30)
CH12
SP
407/55A5 01.10.2, 8:57 AM11