Filter
Top Products
Other connections09
32
En
Chapter 9
Other connections
Connecting external antennas
For an external AM antenna, use 5 m to 6 m of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Only use the included AM loop antenna.
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
Connecting auxiliary audio
components
Using the stereo analog inputs, you can
connect an external component such as a tape
deck or MD player for playback through this
system.
• Connect the (
LINE
2) AUDIO IN jacks to
the analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.
Using the SCART AV output
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
1
• Use a commercially available SCART cable
to connect the (
LINE
1) AV CONNECTOR to
your TV.
Outdoor antenna
5 m to 6 m
Indoor
antenna
(vinyl-coated
wire)
AM LOOP
ANTENNA
PAL connector
Note
1 SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/
monitor (see SCART pin assignment below).
SURROUND
SUB
WOOFER
FRONT CENTER
SPEAKERS (4
Ω - 6 Ω)
R
L
R
R
L
L
R
L
AV CONNECTOR
VIDEO OUT
OUT
LINE
OUT
LINE 2
IN
LINE 1
CONTROL
AUDIO
To audio
output
Tape deck, etc.
AUDI O
R
L
R
L
AV CONNECTOR
VIDEO OUT
OUT
LINE
OUT
LINE 2
IN
LINE 1
7
5 Ω
CONTROL
TV
To SCART
input
DCS-363.book 32 ページ ２００７年４月１８日 水曜日 午後３時３８分