Filter
Top Products
54
DV-535
FL Display Possible causes Operation of the unit
AV1 VER AV-1 chip is not a match with the program of system controller
The sound may not out
with the specific audio.
CPU AERR CPU address error (Hardware is unusual.) No operation
DMA AERR DMA address error (Hardware is unusual.) No operation
FLASH ID
Difference in versions of the internal ROM of the system controller and of the flash ROM,
or bus line failure or reverse installation
No operation
FLASH WRP Write protect error of the flash ROM No operation
FLASH SIG
Difference in part number of the flash ROM
(When the ROM which could't be used was used.)
No operation
FLASH SUM
Check sum error of the flash ROM (It exceeds the regular size.) or reverse
installation (Hardware is unusual.)
No operation
FLASH SIZE Size error of the flash ROM (Use 4 or 8 M-bit.) No operation
ILLGAL The system controller fetched a code other than an operation code (Hardware is unusual.) No operation
RESERVE Undefined interrupt (Hardware is unusual.) No operation
SLOT Inappropriate slot command issued (Hardware is unusual.) No operation
Error codes that are displayed on the FL display without using the remote control unit
7.1.5 ERROR CODE
Error codes that are displayed on the FL display by using the remote control unit
(Mechanism controller error)
To display: ESC + DISPLAY + DISPLAY; Location of the display: At the two digits of center of the FL display
To display the error history: ESC + DISPLAY + One shot; Location of the display: TV screen
FL
Description
of Error
Causes if with a DVD Causes if with a CD Operation of the Unit
11 Search timeout
Search could not be complete within 7
seconds.
Search could not be complete within 7
seconds, and it could not enter the target
area within 7 seconds by VCD scan.
CD : Stops,
DVD : Continues operation
12
Search retry
error
A search could not be completed after 3
retries, search backup was executed 4
times, or in a case of timeout (6 seconds)
while the unit was tracing 11 tracks or
more beyond the target while the search
operation was converging.
Backup against slider skip was executed
4 times during a search, or slider skip
twice resulted in starting from the read-in
point.
CD : Stops,
DVD : Continues operation
19
Tracing timeout
while converging
Timeout (10.5 seconds) while tracing at
the stage of convergence of a search.
Stop
1B
Index 0 search
error
During Track (Index) Search, the search
for the beginning of a program could not
be completed within 3 seconds (20
seconds in the case of Index Search)
after positioning based on the TOC data
was completed.
Stop
22
Timeout of slider
inner
circumference
Inside switch could not ON within 3 seconds. Stop
23
Timeout of slider
outer
circumference
Inside switch could not OFF within 2 seconds. Stop
33
No FOK pulse
during
playback CLVA
When the focus was deviated continuously 20 times.
Adjusts focus at the innermost
circumference and tries to return
to its position where the error
was generated (for 3 times),then
opens. If the same error persists
after one retry, the tray opens.
(No FOK pulse)
38
Disc-type-
sensing error
If normal starting was impossible in the following three cases, disc-type sensing will
be retried if other errors occure excepting C5 error. However, when the focus error
"33" was occured continuously 3 times, it is finished as "38 error" at the moment:
(1) startup with the first disc-type-sensing result, (2) forced startup with another disc
by designating the disc type, (3) forced startup with the original disc by designating
the disc type.
Open