Filter
Top Products
Additional information
09
94
En
i.LINK-related messages
You may see the following messages
displayed in the front panel display when
using the i.LINK interface.
LINK CHECK
The player is checking the i.LINK network. It
does this, for example, when components are
added or removed from the network. The
sound may be interrupted if this happens
during playback.
PQLS ON
Displayed when the player receives a rate
control on request from the receiver during
playback. The sound may be interrupted
momentarily when this happens.
Note that the PQLS feature works only when
the player is connected to a single receiver.
PQLS OFF
Displayed when the player receives a rate
control off request from the receiver during
playback. The sound may be interrupted
momentarily when this happens.
LOOP CONNECT
The i.LINK network cannot function because
it is connected in a loop (see
Creating an
i.LINK network
on page 19).
BUS FULL
The i.LINK bus has reached its capacity and
cannot transmit any more data.
• Static electricity or other external influ-
ences may cause malfunctioning of this
unit. In this case, unplug the power cord
and then plug back in. This will usually
reset the unit for proper operation. If this
does not correct the problem, please
consult your nearest Pioneer service
center.
DV-989AVi _YP.book Page 94 Thursday, August 11, 2005 3:28 PM