Filter
Top Products
7
VARIOUS
OPERATIONS
BASIC
OPERATIONS
BEFORE
OPERATING
Connecting a keyboard
The connection terminal of this unit is designed for a U.S.-English
Keyboard. Take care when using keyboards from other regions as
the keys are different.
Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
`1234567890-=
~! @#$%^^&( ) _+
QWERT YUI OP
{}|
ASDFGHJKL
:"
ZXCVBNM
<>?
[ ]\
,. /
; '
Tab
Ctrl Ctrl
Enter
Backspace
Alt Alt
Shift
Caps Lock
Shift
Inserl Home
Ins Del
End Pg Dn
Home Pg Up
789
456
123
0
+
/*
Delete End
Print Scroll
Screen Lock
Pause
Page
Up
Enter
Num
Lock
Page
Down
<U. S. -English keyboard>
E Connecting another PD-F27
With these connections, the audio signals are output from one PD-
F27 (MASTER unit) to the other PD-F27 (SLAVE unit), and the CDs
loaded in the SLAVE unit are numbered from 301 to 600, so the
whole can be operated as a single 602-disc CD changer. Operation
is possible from a single remote control unit.
1 Use an audio cable to connect the SLAVE LINE IN jack on the
MASTER unit (first PD-F27) to the LINE OUT jack on the SLAVE
unit (second PD-F27).
2 Use a control cable to connect the MASTER OUT jack on the
MASTER unit (first PD-F27) to the SLAVE IN jack on the SLAVE
unit (second PD-F27).
Notes:
• Operation of the single loader function on the SLAVE unit can
not be done with the MASTER unit or the remote control unit.
When operating the SLAVE unit’s single loader function, please
use the SLAVE unit.
• When connecting 2 PD-F27 units, connect system remote
control and CD
•
Deck synchro to the MASTER unit only.
• When using 2 connected PD-F27 units, make sure that the
power of both units is ON.
• When not connecting a SLAVE unit, be sure to unplug the cable.
Notes when 2 PD-F27 units are connected
For usage
• Always turn the power of both units on.
• Make Optical digital out connection to both the master unit and slave unit.
• Make CONTROL IN/OUT jack and CD•DECK SYNCHRO connection to the MASTER unit.
For the remote control unit
• SLAVE unit single loader slot operation can not be done with the remote control unit. Operate using the SLAVE
unit.
• The remote control’s DISC (–/+), 1, ¡, 4, ¢, 7, 8, 3 buttons will function for the corresponding unit that is
operating.
For operation
• Operation of a program spanning 2 connected units is not possible.
• When 2 units are connected, disc numbers will be from 1 to 300 on the MASTER unit and from 301 to 600 on the
SLAVE unit. Custom file numbers will be from 1 to 10 on the MASTER unit and from 11 to 20 on the SLAVE unit.
Relay playback (Playback continues on the SLAVE unit after playback has finished on the MASTER unit)
LLA
yalp
ELGNIS
yalp
MOTSUC
yalp
MODNAR
yalp
MARGORP
yalp
TSEB
yalp
SUOIVERP
yalp
ETIL-IH
nacs
LLA
TAEPER
yaleR
kcabyalp
The keyboard connection jack is a six-pin mini DIN-type.
When purchasing a keyboard, make sure that it accepts
this type of connector.
DIN-Connector
1 +KBD DATA
2 Reserved
3 Ground
4 +5.0 Vdc
5 +KBD CLK
6 Reserved
Shield Frame Ground
5
3
1
6
4
2
Power consumption of the keyboard must be 150mA or
less.