Filter
Top Products
77
DV-535
RDXJ/RB, RDXJ/RD and RDXJ1/RA Types
1 COMPONENT VIDEO OUT jacks
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit. When
using these jacks, be sure to set VIDEO OUT SELECT to the
right position.
2 DIGITAL OUT jack (coaxial)
Use to output the digital audio signal recorded on discs. You
can output the digital signal via either coaxial output jack to an
AV amplifier or receiver.
3 VIDEO OUT SELECT switch
Use to set which output is used to output the video signals.
Select either video/S-video or component video signal output
depending on the connections you make.
4 DIGITAL OUT jack (optical (OPT.))
Use to output the digital audio signal recorded on discs. You
can output the digital signal via either optical output jack to an
AV amplifier or receiver.
5 CONTROL IN jack
Use to connect this player to another component bearing the
Pioneer Î mark. This lets you control this unit as though it
were a component in a system. Player operations are then
performed by pointing the remote control at the component
that the player is connect to.
6 AC IN power cord connection terminal
Use to connect the power cord to the wall outlet.
7 S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
When using this output, be sure to set VIDEO OUT SELECT
to the left position.
8 VIDEO OUT jack
Connect to the video input on a TV or monitor or AV amplifier
or receiver with video input capability.
When using this output, be sure to set VIDEO OUT SELECT
to the left position.
9 AUDIO OUT jacks
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both
connections.
0 TV SYSTEM switch
Use to change the TV signal mode to either PAL or NTSC
according to the type of TV and disc to be used. When the
switch is in the AUTO position, the player outputs the format
on the disc as is.
COMPONENT VIDEO OUT
DIGITAL OUT
AUDIO OUT
TV SYSTEM
PA L
NTSC AUTO
VIDEO
OUT
S-VIDEO
OUT
VIDEO
OUT
SELECT
DIGITAL
OUT
OPT
CONTROL
IN
AC IN
YP
B
P
R
L
R
1
2
3
4
5 6
7
8
90