Filter
Top Products
101
En
Useful Remote Control Features
13
English
VCR control buttons
When the VCR is preset by the remote control’s learning
function, the remote control buttons function as follows:
(Mode switch must be set to VCR).
• Press the input selector button (INPUT 1–6) that matches
the input terminal connected to the VCR. The VCR can be
operated using 1 to 8.
• VCRs made by manufacturers not listed in the system can be
controlled using the remote control if buttons 1 to 8 have
learned the functions. See page 92.
1CH +/–
Selects the channel on the VCR
2 (PLAY)
Selects playback
3 (RWD)
Rewinds the tape and allows picture search
4SOURCE
Turns the power of the VCR On and Off
5 (PAUSE/STILL)
Pauses playback and displays still pictures
6 (FF)
Rapidly advances the tape and allows picture search
7 (REC)
Starts recording
8 (STOP)
Stops tape transport
NOTE
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
1
4
3
7
6
85
2
Mode switch
(with “VCR”
selected)
PDP_PRO1540HD.book Page 101 Wednesday, August 2, 2006 6:01 PM