Pioneer VRB1332-A DVD Player User Manual


 
Initial Settings menu
07
35
En
Video Output settings
Linear PCM Out Down Sample On
96kHz digital audio is converted to 48kHz for digital output.
Note that High sampling rate DVD-Audio discs (192kHz or
176.4kHz) automatically output down-sampled audio through
the digital outputs.
Down Sample Off
96kHz digital audio is output as is at 96kHz.
MPEG Out MPEG > PCM
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG
MPEG encoded digital audio is output as is.
Setting Option What it means
TV Screen
(See also
Screen sizes
and disc formats
on
page 44.)
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide)
Set if you have a widescreen TV.
Component Out Interlace
Set if your TV is not compatible with progressive scan video.
Progressive
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). See also
Switching
the video output to interlace using the front panel controls
on
page 11.
Note that progressive scan video is only output from the
component video jacks.
AV Connector Out Video
Ordinary (composite) video output, compatible with all TVs.
S-Video
Almost the same quality as RGB, but can give better results if
you’re using a long SACRT cable.
RGB
If your TV is compatible, this setting gives the best picture
quality.
Setting
Option What it means
DV575A WY_Mid.book 35 ページ 2004年1月28日 水曜日 午後6時53分