Filter
Top Products
Using the tuner
07
52
En
Searching for RDS programs
One of the most useful features of RDS is the ability to
search for a particular kind of radio program. You can
search for any of the program types listed on the previous
page.
1 Press the BAND button to select the FM band.
RDS is only possible in the FM band.
2 Press the PTY SEARCH button.
SEARCH
shows in the display.
3 Use the MULTI JOG dial to select the program
type you want to hear.
4 Press ENTER to search for the program type.
The system starts searching through the station presets
for a match. When it finds one, the search stops and the
station plays for five seconds.
5 If you want to keep listening to the station, press
ENTER within the 5 seconds.
If you don’t press
ENTER
, searching resumes.
If
NO PTY
is displayed it means the tuner couldn’t find
that program type at the time of the search.
Note
• RDS searches station presets only. If no stations
have been preset, or if the program type could not be
found among the station presets
NO PTY
is
displayed.
FINISH
means the search is complete.
Using EON
When EON (Enhanced Other Network information) is
turned on, the receiver jumps to an EON-linked
broadcast when it begins, even if a receiver function
other than the tuner is being used. It can’t be used in
areas that EON information isn’t transmitted and when
FM broadcast stations don’t transmit PTY data. When the
broadcast ends, the tuner returns to the original
frequency or function.
1 Press the BAND button to select the FM band.
EON is only possible in the FM band.
2 Press EON to select one of the possible modes.
Press repeatedly to switch between:
•
EON TA
(Traffic Announcement) – Sets the tuner to
pick up traffic information when it is broadcast.
•
EON NEWS
– Sets the tuner to pick up news when it
is broadcast.
•
OFF
– Switches off the EON feature.
When set to
TA
or
NEWS
, the
EON
indicator in the
display lights (it flashes when receiving an EON
broadcast). The indicator in the display lights when the
current station carries the EON service.
Note
• The EON function does not work when listening to
AM reception.
• You can’t search for traffic announcements and
news at the same time.
• You cannot operate the
TUNER EDIT
and
PTY
SEARCH
buttons while the
EON
indicator in the
display is lit.
• If you want to change to a function other than the
tuner when the
EON
indicator is flashing, press
EON
to turn EON off.
Clearing all stations from the RDS and EON
searches
The receiver will automatically register an identifying
marker (called a PI code) for any station you input into
the memory classes which can receive RDS or EON data.
If you want to remove the currently memorized stations
from RDS and EON searches, you can do it by erasing the
PI codes.
1 Press and hold EON for about two seconds.
ERASE PI
is displayed.
2 Press ENTER.
ERASE PI
flashes for two seconds to indicate the PI codes
have been erased.
STANDBY/ON
MULTI JOG
LISTENING MODE
SELECT
ENTER
PHONES
TUNER
CONTROL
TUNER
EDIT
SYSTEM
SETUP
RETURN
PTY
SEARCH
EON
MCACC
SETUP MIC
DIGITAL IN S
-
VIDEO VIDEO
VIDEO2 INPUT
AUDIOLR
MULTI JOG MULTI JOG
TUNING/
STATION
BAND MPX TONE
ACOUSTIC
EQ
DIALOG
ENHANCEMENT
MULTI CH
IN
SIGNAL
SELECT
EXTENDED
MODE
SPEAKERS
MIDNIGHT/
LOUDNESS
MULTI
JOG
MULTI
JOG
PHONES
TUNER
CONTROL
TUNER
EDIT
SYSTEM
SETUP
RETURN
PTY
SEARCH
EON
MCACC
SETUP MIC
DIGITAL IN S
-
VIDEO VIDEO
VIDEO2 INPUT
AUDIOLR
MULTI JOG MULTI JOG
TUNING/
STATION
BAND MPX TONE
ACOUSTIC
EQ
DIALOG
ENHANCEMENT
MULTI CH
IN
SIGNAL
SELECT
EXTENDED
MODE
SPEAKERS
MIDNIGHT/
LOUDNESS
MULTI
JOG
MULTI
JOG
VSX_1015.book.fm 52 ページ ２００５年３月７日 月曜日 午後７時０分