Filter
Top Products
Watching DVD
Connecting DVD
1. Turn on the PDP monitor and press input selection button of the remote control.
2. Use button to select component and then press button.
(Audio should be connected to component voice terminal.)
3. Turn on DVD and press Playback button.
Connecting to component terminal
Connect Video connection line to PDP component terminal (Y,
PB, PR) and component video output terminal of DVD.
Connect audio connection line to PDP component Audio input
terminal and Audio output terminal of DVD.
You can make S-Video connection or Composite connection
instead of connecting to component terminal. (Please refer
to page 16 on connection method.)
DVD output terminal can be indicated to Y, PB, PR or Y, CB, CR
according to the product.