Filter
Top Products
24
Declaration of Conformity
Manufacturer's Name: Planar Systems, Inc.
Manufacturer's Address: 1195 NW Compton Drive
Beaverton, OR 97006 USA
declares that the products
Model Numbers: PD370/PD420/PD470/PD520
conforms with the provisions of:
Council Directive 89/336/EEC and amended by 92/31/EEc and 93/68/EEC on Electromagnetic
Compatibility;
EN55022:1998 Radiated and Conducted Emissions from IT Equipment
EN55024:1998 Immunity of IT Equipment
Including: EN61000-4-2 Electrostatic Discharge
EN61000-4-3 Radiated Immunity
EN61000-4-4 Electrical Fast Transients
EN61000-4-5 Line Surge
EN61000-4-6 RF Conducted Susceptibility
EN61000-4-8 Magnetic Field Immunity
EN61000-4-11 Voltage Dips and Interrupts
And: EN61000-3-2 Harmonic Current Emissions
EN61000-3-3 Voltage fluctuations and Flicker
Council Directive 73/23/EEC and amended by M1 and C1 on Low Voltage Equipment Safety:
EN60950:2001 Safety of IT Equipment
The Technical Construction File required by this Directive is maintained at the corporate
headquarters of Planar Systems, Inc., 1195 NW Compton Drive., Beaverton, Oregon
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Any changes or modifications to the display not expressly approved by Planar Systems, Inc. could
void the user's authority to operate this equipment.