Filter
Top Products
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2008 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
Data Sheet
2
Applications
Access Control System – traditional
installation
Most of the enterprise and government use
access control plate and Mifare or RFID to
authorize entrance identity. With traditional
deploy, access control machine use RS-232 or
RS-485 serial interface and cables connect to
login server. With connection to ICS-10x Serial
over Fast Ethernet Converter, the access control
machine is able to be extend over longer
distances via fiber optical interface. The distance
can be up to 20km in a local range. Or the ICS-
10x can be linked to a XDSL router to get the
internet access capability; the access control can
be set and monitored over the internet.
Process Control
To monitor, configure and manage the
Robot conveyer including other machines in
manufacturing, PLC (Programmable Logical
Control) is required. The PLC is used to drive
above the manufacturing process. The ICS-10x
can be set to TCP Server mode and connect
the PLC. The administrator can configure and
set command settings through Fast Ethernet
intranet to control the PLC, the administrator
and workstation. There is no need to be always
by the side of the I/O machine.
RTU Data Collect – UDP Mode
Connect with RTU (Remote Terminal Unit) to
collect and monitor the data of waves, signal
and power utilization. ICS-10x can be used set-
up UDP mode and send data over Fast Ethernet
to Local server or over internet to remote server
automatically.
Surveillance motion control – Pair
Connection Mode
Using pair connection along with fiber optical
patch cord, the ICS-10x extend RS-232 / RS-422
/ RS-485 interfaces distance from surveillance
and scanner to the control keyboard/joystick
which is installed in the remote monitor center.
ICS-100
ICS-102
ICS-102S15