Filter
Top Products
Plasmon D875 - D2175 User Manual Appendix D
Document Revision E Page 79
4 Picker is 2nd destina-
tion element, src ele-
ment = 2nd dest
element
86 1 Element unexp
empty
No trays to use in cycle
Full test
Run Check Elements
2 Tray not seen during
pick attempt
87 1 Element unexp
full
Home sensor blocked
after store attempt
Obstruction
in path, Align-
ment problem
Check path, run offsets
2 Picker is full, attempting
to return tray to last ele-
ment
8B 1 Picker is full VP or Pemt sensor
blocked by tray moving
to the pick position
Firmware,
Picker faulty
Tray in picker while picking,
initialize and retry, replace
picker
2 VP or Pemt sensor
blocked moving to the
unload drive position.
3 Both pickers are not
empty to do an
exchange (during
check move)
4 Picker full, not a move
to Lift and from Lift (dur-
ing check move)
5 SCSI exchange 2nd
destination picker,
source not picker
8C 1 Both pickers full Check move, NVRAM
says both pickers full
Main control-
ler circuit
board, firm-
ware
Firmware recovery issue,
replace Main controller cir-
cuit board
2 Check single element,
NVRAM says both pick-
ers full
3 SCSI Mag door open,
both pickers full so
magazine can't be
checked
Error
Code
(hex)
Sub-
code
Error
Description
Subcode
Description
Compo-
nent
Corrective Action