Filter
Top Products
System Setup
21
You can change the default settings of this unit to customize its performance to your own preferences.
Note: Program the system while playback is stopped completely or there is no disc in the payer.
To Set up your system:
Press the SETUP button and the setup menu will appear on the screen.
Press the direction buttons to select a sub-menu to program and press the ENT/ENTER button to access. In
the sub-menu, use the button to highlight the “MAIN PAGE” and press the ENT/ENTER button to exit.
Press the SETUP button again to exit the setup menu at any time during setting.
1.
2.
3.
General Setup
TV DISPLAY
This item is used to set the TV display mode.
Press the buttons to highlight this item.
Press the button to access.
It includes 4:3 PS, 4:3 LB, and 16:9.
Press the buttons to choose the desired language.
Press the ENT/ENTER button to confi rm your selection.
Press the button to exit.
Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is connected. Select
16:9 when a 16:9 wide screen TV is connected.
•
•
•
•
•
•
•
ANGLE MARK
This item is used to set the angle mark on or off.
Press the buttons to highlight this item.
Press the button to access.
Press the buttons to select ON or OFF.
Press the ENT/ENTER button to confi rm your selection.
Press the button to exit.
•
•
•
•
•
•
OSD LANGUAGE
This item is used to set the OSD (on-screen display) language.
Press the buttons to highlight this item.
Press the button to access.
There are several languages for you to choose.
Press the buttons to choose the desired language.
Press the ENT/ENTER button to confi rm your selection.
Press the button to exit.
•
•
•
•
•
•
•