Filter
Top Products
Instruction ManualManual
FUNCTIONS & FEATURES
Turn On/Off
1. Turn On
Plug in the power cord, and the TV should enter into Standby mode. Pressing STANDBY key will turn on
the TV and its power indicator light.
2. Standby
While the TV is on, press the STANDBY key will put the TV in Standby or off mode. The power indicator
light on the TV set will turn off.
Changing the Channel
While in Tuner mode, press the CH+/- keys to change the channel, or use the numeric keypad to enter a
new channel.
Adjusting the V
olume
To adjust the volume, press the VOL+/ - keys. Also, you may press the FUNCTION (F) key along with the
VOL +/ - keys to adjust the volume in increments or decrements of 4.
Muting the V
olume
To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key.
Basic Functions
Function Selection Menus
Features
This menu allows you to adjust the various picture settings.
Press to move between the various settings, and to adjust
them. When finished, press the MENU key to return to the main menu.
T
int: -31 (more purplish) to +31 (more greenish)
Brightness: 0 (dimmest) to 63 (brightest)
Contrast:
0 (minimum contrast) to 63 (maximum contrast)
Color: 0 (minimum color) to 63 (maximum color)
Sharpness: 0 (minimum sharpness) to 63 (maximum sharpness)
Note:
To control picture artifacts reduce the sharpness setting when
viewing DVD discs.
Picture Menu
To change the setting of any function, press the MENU key to bring up the main menu. Press to highlight
the desire sub-menu and press (or ENTER) to access. While in the sub-menu, press to select
the item and to adjust the setting. Press the MENU key to return to the main menu and exit.
While in the setup menu, CH-/+ and VOL-/+ key on the front panel will function as the / / on the
remote control.
Tint
Brightness
Contrast
Color
Sharpness
00
32
32
32
32
Picture
11