Filter
Top Products
12
I
nstruction ManualManual
Useful Remote Control Features
DISPLAY
This key allows you to display the current information of the TV screen on the upper right hand corner of th
e
screen. (channel, antenna mode, time, video, etc.)
TIMER
This key allows you to directly access the Timer menu. For an explanation of this menus features, pleas
e
see page 10.
SCAN
Press the SCAN key twice, and the TV will begin to scan through all active channels. To stop the Scan
,
pressing any key can interrupt scanning. Please note that Scan will only work in Antenna mode.
PICTURE
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate thes
e
picture modes, press this key, and you can choose among User, Normal, Movie and Sports.
RECALL
This key will allow you to return to the last channel you were viewing. Pressing it again will return you to th
e
channel you just left.
CC
Pressing the CC key will activate the currently selected Closed Captions or Text under the System Menu
.
Pressing it again will turn off the Closed Captions or Text.
VIDEO
This key allows you to toggle between antenna and different video modes.
Child Lock
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, an
d
then press MUTE. You should see a key symbol appear on the screen. This will lock out all remote function
s
(except for Standby). To unlock the TV, press and hold the F key and press MUTE. This will unlock the TV
.
Please note that the only way to activate or deactivate the Child Lock feature is via remote control - pleas
e
insure that it is stored securely.
SLEEP
Press the SLEEP key repeatedly to switch the TV to one of the following modes :
-- 15 30 45 60 90 120 150 180 (Unit: Minute)
The TV will automatically enter the Standby mode when the preset Sleep time is up.
The TV will display a message one minute before the Sleep timer runs out.
0-9
Press the 0-9 keys to enter channel numbers directly (2-69 in the Air mode or 1-125 in the Cable mode).
Press the corresponding Number key(s) to enter a channel number from high-digit to low-digit.
Each digit should be entered at 3 seconds time interval.
F
UNCTIONS & FEATURES (continued)