Filter
Top Products
LCD Installation
1. Determine the mounting hardware that is to be
used.
2. If your LCD has a flat back, use the M4x12mm
Phillips Head Screws.
NOTE
: If your LCD has a recessed back, use the
longer M4x30mm Phillips Head Screws
and 3/4” Spacers.
3. After you have determined the appropriate screws,
use them to attach the mounting plate to the back
of your LCD.
4. Do not over-tighten the screws.
Final Installation
1. To complete the installation, simply slide the
mounting plate onto the back plate.
2. The plastic tab on the top of the back plate should
click, indicating that the mounting plate piece is
secure.
3. If you need to remove the mounting plate, push in
on the tab and slide the mounting plate up.
FLAT LCD TV WALL MOUNT
INSTALLATION GUIDE: XUF-1330L
Produced By:
Progressive Marketing Products, Inc.
3130 E. Miraloma Ave.
Anaheim, CA 92806
800-368-9700
victory@mounts.com
Slide Plate Down