Filter
Top Products
Appendix
• The PC Screen continually appears and disappears.
Check the connection between the TV and the computer and see if the connector is Iocked.
• A 'There is no signal "message appears.
This happens if the signal from the video card is exceeded for the maximum resolution or frequency of the TV. Try to set the
maximum resolution or frequency for the TV.
See if power save mode of the PC functions properly(This is deactivated when any key is pressed or the mouse is moved)
• The screen looks like there is water flowing on it.
Check the connector connected to the TV.
• The screen is unclear and blurry.
Change the frequency and phase adjustment. Change the Resolution and frequency to the standard limit.
• Unstable and flickering screen.
The resolution and frequency of the PC's Graphics Card should be set within the TV's range. Check the TV menu's current
mode and standard mode and set it up again.
• Some modes in standard mode are not working.
Check the compatibility of the video card.
tf it is not working for compatible hardware, try to upgrade the driver of the graphics card
35