Filter
Top Products
Appendix
Identifying Problems
If there are any problems using the product, please first consult the list below. If the list beIow does not solve the problem, call our
Customer Service Center immediately.
Setup and Connection
The TV won't turn on Check your power cable connection.
• t can't view the Basic channels. Check the connection of the antenna cable
• t want to view cable channels. Register with your local cable company then connect their receiver to your TV.
• t want to view satellite channels. Setup your Satellite parabola antenna then connect your satellite receiver to the TV.
• Digital broadcasting is not functioning Check your antenna cable connection. Check if the digital channel selection is correctly
connected to your antenna cable.
Menu and Remote Control
• The Remote Control isn't functioning well.
Change the batteries.
Check the polarity of the batteries.
Check the angle of the remote control from the product or ifthere are any obstacles between the remote control and the product.
Check if you have pressed the correct key for the correct option
Try to a bright light position near TV's which transmit astrong light source on TV <remote receiver> window
• 1cannot change channels with the remote control.
Press [TV/AV] and select <TV>.
Try to use the remote control for the cable or satellite receiver to change the channeI
• External input channels cannot be selected
Check your external input connection cabte.
• A Menu cannot be selected.
Check if the menu is grayed out, and if it is, that menu cannot be selected.
Screen
• Poor picture
Is the power cord unplugged? Make sure the power cable is plugged in correctly, and then press the power of the remote control
• Black picture
Check if external input mode is seIected
Press [external input selection] and select TV
• Lined and flickering picture
Try to fineIy adjust the channel.
Are there any TV waves flowing or cordless radio transmitting stations? Avoid using cordless phones, hairdryers or electrical
drills
33