Filter
Top Products
Troubleshooting
Problem
s
Solutions
NO PICTURE
Connect power cord correctly.
Turn on power.
Connect video cable correctly.
Select the input signal source with proper cable connection with the source button.
ABNORMAL
COLORS
Match the colors on the cables to the ports o
ff the back of the television. I.E. red cable to red colored
port.
PICTUR
E IS
T
OO
DARK
Adjust y
our
contr
a
st,
brightness and lamp settings from the OSD Menu. For adjust controls
AUDIO ONLY N
O
PICTURE
Make sure you have connected both your video and audio cables.
The TV
’s tuner signal must not be lower than 65 %.
PICTURE ONLY NO
AUDIO
Make sure the audio cable is connected.
Readjust your volume via the remote control.
The TV
’s tuner signal must not be lower than 65 %.
REMOTE C
ONTROL
DOES NOT WORK
T
urn off the TV, unplug it from the socket. Remove the batteries out of the remote for 30 minutes.
Press the remote buttons and the power button randomly for a good 2 seconds, and then reinstall the
batteries. Try the remote to see if it works. For battery removal instructions.
The TV’s remo
te sensor is also housed in the same place as the power indicator light. Please make
sure there is line of sight from the remote control’s front sensor to the remote sensor of the TV.
CANNOT RECE
IVE
SUFFICIENT
CHANNELS
THROUGH THE
ATSC/NTSC TUNER
The TV’s tuner signal must not be lower than 65 %. Change the direction of your antenna and rescan
your channels. If you have cable call up your cable company and ask about signal strength of your
local cable.
NO COLOR
Please adjust your pictur
e setup and make sure the saturation and the RGB are not turned all the way
down. For adjustment controls.
The TV
’s tuner signal must not be lower than 65 %. Check your signal.
WEAK SIGNAL
OR
NO PROGRAM
SYMBOL ON
SCREEN
The TV’s tuner signal must not be lower than 65 %. Change the direction of your antenna and rescan
your channels. If you have cable call up your cable company and ask about signal strength of your
local cable.
TV’S UNIVERSAL
REMOTE CODE
This television follows NEC’s universal r
emote code. To find the actual code you must read
through your
own universal remote’s guide book.
Troubleshooting
The following table contains the common problems and th
e solutions to these problems. Please check this list before
you contact the technicians.