PYLE Audio PLTTB9U Blu-ray Player User Manual


 
CONNECTION
1.
Connect the power cord to AC outlet
2.
Switch the function selector
to
PHONO or USB/SD or TUNER function. Now your system
is
ready to play the music.
FM/AM OPERATION
1.
Set FUNCTION switch to TUNER mode, then choose needed band (AM, FM and FM stereo)
by BAND switch.
2.
Search stations: Rotate the TUNER knob to choose request station, or press PREY /NEXT
keys to choose idea stations.
User can also press one
of
the two keys a litte longer around 1.5s
then the model will search automatically and it would stop at a clearest station.
PHONO OPERATION
I.
Press the Function switch to PHONO position. Then put a record
on the
Platter lightly.
In
certain circumstances,
45
RPM adapter
is
needed;
2.
Select the speed
of
record: 33
113,
45, 78rpm according to vinyl
to played.
3.
Remove the stylus guard and push the lift lever upward to raise
the tone arm from the arm park, and then move the cartridge holder over the record gently,
now the platter will run automatieally (default set
of
AutolManual stop switch at ON
position). Then put down the lever, the tone arm would drop and touch record surface gently.
Now users can enjoy their favorite sons.
4.
Select the auto/manual stop control: The turntable will stop automatically while the song on
the record finished when the switch at
ON position. The other side it will always play when it
is at
OFF position, this may helps to play some long recorded vinyl which can not
be
played
to the end by normal
way.
5.
Rotate the volume control knob to get desired sound
leveL
6.
Push the arm lift lever up to raise the arm, now platter will still running but play will pause.
To
continue the play, user just need to put down the lever.
7.
Record vinyl: Firstly insert memory device (USB drive
mp3
player or
SD
IMMC
card). When
turntable
is
working, press the REC key on front control board
of
the unit, then press
SOURCE key to choose USB or CARD mode, later press REC key again now recording
works will begin.
To
finish the work just need to press the STOP
key.
Note: Recordedfile in mp3 format with 128bit.
USB/SO RECORDING AND PLAYING
PLAYING
THE
MUSIC
FROM
USB/SDIMMC
DIRECTLY:
1.
Be
sure power is on, insert USB drive or Mp3 player into USB port andlor insert MEMORY
CARD (SDIMMC) into
SD
socket.
2.
Set FUNCTION switch to USB/SD position, press SOURCE key to chopse music source
USB orSD.
3.
The device supports for Mp3 and WMA formats. During play status, press PLAYIPAUSE
button once to halt playing, press it again to continue.
,.
4.
Press PREY once
to
play the preview song, hold down continuously to speed
up
selecting
backward.
Press NEXT once to play next one, holds down continuously
to
speed up selecting
forward.
5.
Press FOLDER+
key,
the unit will search music files from first folder to the last one on
mcmory devices, then press continually to recycle overview all folders.
6.
Press STOP to end
up
the
play.
RECORD OPERATION:
1.
Select Audio source: PHONOE or External audio source through AUX
IN
jack and play it
on.
2.
Insert
USB
drive and/or memory card .
.
1.
Now press REC key and press SOURCE
to
choose memory type
USB
or
SD.
Then press
REC
once again,
it
will start working
IlDW.
4.
Press STOP key to end
up
the work..
Note:
The device also support
for
transit music files between SD and
USB.
Steps are similar
to
above operation.
The device supportsfor
Mp3
and WMAformats playback.
PHONES OUTPUT/EARPHONE JACK
1.
The turntable can be connected to amplifier or speakers by 3.5mm
HEADPHONE jack.
2.
Private listen
of
earphone also can be realized through this jack.
AUX
IN
JACK
1.
The external sound sourcing can be played and recorded through the device.
2.
The external sound sourcing can be recorded to the U stick or SD througb the
sockets
..
REPLACING STYLUS