Filter
Top Products
15
OPERATION
Then you can press VOL / buttons
(48) to select hour or minute and press
TUN/CH / buttons (47) to change the
corresponding item.
Menu Control operation in CDC mode
Press MODE button (12) on front panel
or MODE button (43) to select CDC
mode. The following information will
appear on the display (5).
CDC PLAY 00:12
VOLUME 36 DISC 01
BASS 0 TRACK
TREBLE 0
BALANCE L-R
FADER F-R
LOUD OFF
EQ FLAT
01
Press MENU button (19) or (45), the
VOLUME will be selected, then press
TUN/CH / buttons (46) to select the
item upward or downward. Then press
VOL / buttons (48) to adjust the
selected item. The corresponding value
will show on the display.
Respectively press PAU (28), INT (29),
RPT (30), RDM (31), CD- (32), CD+ (33)
button on the panel to enter the
corresponding function referring to the
CDC operation described above, the
corresponding information (such as
PAUSE, INTRO, REPEAT, RANDOM and
the disc number) will appear on the
display (5).
CDC PLAY 00:24
VOLUME 36 DISC 03
BASS 0 TRACK
TREBLE 0
BALANCE L-R
FADER F-R
LOUD OFF
EQ FLAT
02
REPEAT
Directly press TUNING/TRACK button
(14) on the panel to move to the s
previou track; press TUNING/TRACK
button (13) on the panel control to move
to the next track.
TV operation (when the unit is
connected to other TV unit through
the cable with the 13-pin din plug on
each terminal)
Switching to TV mode
Press MODE button (12) on the front
panel or MODE button (42) on remote
control to select TV mode and the
memory channel will show on the TFT
display (5).
Selecting receiving mode
In TV mode, press TV/AV button (21)
or (41) to select among TV/ AV1/AV2/
RGB (optional). The corresponding
state will show on the TFT display (5).
When you connect the RGB terminals
on the back of the unit to the
corresponding RGB system, then
press MODE button on remote
control to select RGB mode, the RGB
signal will appear on the screen.
Note: You can receive the TV/AV1
/AV2 mode when you brake the car.
If you are driving the car, you can't
receive the picture signal in TV/AV1
/AV2 just receive the sound signal, it
is blue screen then.
Selecting channel
- Press CHANNEL button (24) or
TUN/CH button on remote
control to choose channel upward
and or Press CHANNEL button
(25) or TUN/CH button on
remote control to choose channel
downward.
- The numeric buttons (0,1~9) (36)
allow you to select the
corresponding channel directly.
- Press digital select button (-/--) (39)
cooperatively used with numeric
buttons to select channel desired.
For example, when you want
select 16 channel, press -/-- (39)
to switch between "-" and "--",
when the "--" appears on the