6
RS-422/485
● No. of Ports : 422/485 * 1 Port (Terminal Block)
● RS-422 Signals : RxD+ , RxD- , TxD+ , TxD- in Full-duplex (Surge Protection)
● RS-485 Signals : Data+ , Data- in Half-duplex (Surge Protection)
●
Receive buffer : 576 Byte
●
Transmit buffer : 640 Byte
● Baud Rate Speed : 300 bps230.4k bps
● Built-in RS-422/RS-485 Terminal Resister (Surge Protection)
● Optical isolation protection : 3000V DC
● Connected Serial port type identification : Auto-Detection
● Built in Terminal 100 Ohm Terminal resistor SW selection ON/OFF
● 15KV ESD for all signal
USB Port
No. of Ports : USB * 1 Port
● Fully compatible with the USB V1.0, V1.2, V2.0
● USB type B connector
● Baud Rates : Full speed 12 Mbps.
Driver OS Support
●
Windows – 98E / 2000 / XP / Server 2003 /Vista , Mac osx / os9 , Linux 2.4 / 2.6
Power :USB bus power as voltage DC +5V
Led Lamp :
SYS (Red), Rx (Orange), Tx (Green)
Environment :
● Operating Temperature: 070
● Storage Temperature : -2085