Filter
Top Products
12
• Low-voltage electricity flows through the circuit con-
trolled by a switch module, even when the switch is off.
This is necessary for proper operation of the switch
module. You can completely turn off the electricity by
setting the switch’s disable switch to off (left).
Caution:
Do not use a wall outlet module to replace an out-
let that is controlled by a wall switch.
SETTING THE MODULE’S CODES
Set
HOUSE CODE
on all your modules to the same letter as
HOUSE CODE
on your controller (
A
through
P
).
When setting the
UNIT CODE
, make sure that all modules
that are set to the same unit code respond as a group. If you
have several modules controlling lights in a single room, set
them to the same unit code. (If you set every light module to
a different unit code, you might not have enough separate
unit codes to complete your system.)
61-2677CD.fm Page 12 Tuesday, July 6, 1999 11:05 AM