Filter
Top Products
Need help? Call
1-800-955-2599
8
OPERATION
1. Press the device key for the device you want
to control.
2. Point the 3 in 1 toward the device and press
PWR
to turn it on.
3. Repeat Steps 1 and 2 for other devices.
4. Point the 3 in 1 toward the device you want
to control and press the appropriate device
key, then the desired command keys.
The command keys on the 3 in 1 work the
same as the keys on the device’s original
remote control; however, the labeling might
differ slightly.
5. To turn off the last device you selected, press
PWR
. To turn off other devices, press the
device key for the device you want to turn off,
and then press
PWR
.
PUNCH THROUGH
The punch-through feature lets you control two
different devices without pressing the device keys
for each one first. Here’s how it works.
No device uses all of the 3 in 1’s keys. For exam-
ple, a TV is often the only device that uses the
VOL
keys, and a VCR is usually the only device
that uses keys such as
REWIND
,
FAST F
, and
RECORD
.
When you press
TV
to control a TV, then press
VCR
to control a VCR, any keys not used by the
VCR will still control the TV. For example,
VOL
still controls the TV’s volume.
If your cable box or VCR has a volume control,
you can turn off the punch-through feature so you
can use the cable box’s or VCR’s volume control
to control the sound (if it can already do so).
15-1916b.fm Page 8 Monday, July 19, 1999 12:17 PM