Filter
Top Products
12
Main Menu
Picture
Sound
Preferences
Time
Setup
Helpful Hints
Press CH+ or CH- to see
which channels are in the TV’s
memory. You can also select
channels that have not been
memorized using the number
buttons on the remote control.
To delete unwanted channels
from the TV’s memory or to
add more channels, see ADD/
ERASE on page 15.
You cannot select the Setup
menu if the TV is set to a video
input channel (FRNT). Press
INPUT repeatedly to get to
regular TV programming.
Searching
Please Wait
Stop
TV 2
Setup
TV/CATV CATV
Channel 1
Add/Erase Erase
Manual Down
Auto Search
Favorite List
Main Menu
Picture
Sound
Preferences
Time
Setup
Auto Search (Setting TV Channels)
You can set your TV to receive local TV
channels (from an antenna) or Cable TV
channels (when you have Cable TV service).
Then, use Auto Search to set up channels that
are available for you. This makes it easy for
you to select only the available TV stations
when you press CH+ or CH-. Before you start
Auto Search, make the Antenna or Cable TV
connection described on pages 4 and 5. In the
menu select TV or Cable (CATV) as described
on page 11.
Press MENU to see the main menu.
Press CH+ or CH- to highlight Setup.
Press OK to enter the Setup submenu.
Press CH+ or CH- repeatedly to
highlight Auto Search.
Press VOL+ to start programming TV
channels. Press VOL- if you need to
stop channel programming during the
process.
When channel setup is completed, the TV
will go to its lowest channel.