RCA ANT751 TV Antenna User Manual


 
ANT751
Outdoor Antenna
User’s Guide
Step 1: Unpack
Remove the antenna and the hardware bag from package. Make sure the
following parts are in the package:
• Antenna
• Mountingpipeandfoot
• Hardwarebag
U-Bolt (2)10/32”Hexnuts
Mast Clamp Insert (5)1/4”HexNuts
(2) Black Plastic Plugs (2) 5/8” Bolts
Matching Transformer 2 1/2” Screw
(4) 7/16” Washers
Starting from the rear of the antenna, unfold
the elements on both the top and bottom of the
antenna until they lock into place (as illustrated
below). Make sure the elements are flat and
parallel to each other when you’ve finished.
BEFORE YOU START!!!
PleasereadtheIMPORTANTSAFETYINFORMATIONsheet
included in this package.
Step 2: Unfold the antenna’s elements
Rear