Filter
Top Products
DV2011
12
TUNER OPERATION
Select a Band
Press the BAND button (19) on the control panel (or the SOURCE button on the remote control)
to change between three FM bands and two AM bands. Each band stores up to six preset
stations.
Tuning
Manual Tuning
Press the up >>| (20) or down |<< button (21) for less than three seconds to enter seek tuning
mode. Press the up >>| or down |<< button to change the radio frequency number up or down
one step.
If using the remote control, press the TUNE + or TUNE - buttons to change the radio frequency
number up or down one step.
Auto Seek Tuning
Press the up >>| (20) or down |<< button (21) for more than three seconds to move to the next
station automatically.
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Press and hold a preset button (12-17) for three
seconds. The preset number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button (12-17) to select the corresponding stored
station.
Automatically Store / Preset Scan
Automatically Store
Select a band (if needed). Press A/PS (11) for more than three seconds to automatically select
six strong stations and store them in the current band. The new stations replace any stations
already stored in that band.
Preset Scan
Select a band (if needed). Press A/PS (11) to scan stations stored in the current band. The unit
will pause for ten seconds at each preset station. Press A/PS again to stop scanning when the
desired station is reached.
Stereo
The unit will automatically pick up a stereo signal, when available. When in stereo mode, the “ ”
icon appears in the display. When no stereo signal is available, the unit will automatically revert to
mono operation, and no icon will be displayed.
DV2011
DIGITALAUDIO
COMPACT
MP3
WMA
MODEMODE
MUTEMUTE
BANDBAND
LOUD
LOC
EQ
1 2 3 4 5 6
A/PS DISP
INT RPT RDM
AVINAVIN
1
11
12
13
14
15
16
17
18
20
3
4
5
6
7
8
9
10
19
21
2
22
2324