RCA E13341 CRT Television User Manual


 
13
TROUBLESHOOTING
If you experience any difficulty with your TV, check these basic remedies
before calling your service technician.
TV will not turn on or controls don’t work
Check to make sure it is plugged in.
Check the wall receptacle (or extension cord) to make sure it is
live by plugging in something else.
Try unplugging set for one minute, plugging it back in, and then
turning it on again.
Make sure the Front Panel Lock feature is not set. (See page 4 for
details.)
Problems with remote
Maybe something is between the remote and the remote sensor.
Maybe the remote is not aimed directly at the TV's remote sensor.
Maybe batteries in remote are weak, dead or installed incorrectly.
Try replacing batteries.
Press the POWER button and then try again.
Turns on or off while playing
Electronic protection circuit may have been activated because of a
power surge. Wait 30 seconds and then turn on again. If this
happens frequently, the voltage in your house may be abnormally
high.
Maybe the Sleep Timer or Alarm Timer is activated.
Blank screen or black box appears on the screen
Try another channel.
Press RESET, in case the picture controls are set too low.
Captioning may be turned on. Check the Closed-Caption Display
control panel in the Screen menu.
No sound, picture okay
Maybe sound is muted. Try pressing volume up button to restore
sound.
No picture, no sound, but power is on
Maybe cable/air function is in wrong position. Try another
channel.
Maybe a vacant channel is tuned. Try another channel.
Input may be selected. Make sure the external device is turned on
and playing.
Sound okay, picture poor
Check antenna connections.
Try adjusting sharpness function to improve weak signals.