RCA E13342 CRT Television User Manual


 
5
GETTING STARTED
Point and Select
To use the on-screen menus, you
need to know one rule: point and
select:
Point to your selection with the
on-screen highlight. (Use the
VOL < / > buttons on your remote
to move left and right; use the
CHAN ^/v buttons to move up
and down.)
Press MENU button to select the
highlighted item.
Remote Control Buttons
When operating the remote, point it directly at the front of the TV.
Objects between the remote and the remote sensor can block the signal to
the TV.
This remote has a NightGlo feature which illuminates the keypad. To save
battery power, do not activate the NiteGlo feature when the remote is used
in well lit rooms.
OFF Press to turn the TV off.
TV Turns on the TV. Shows the displays on the screen. Sets the remote to
control the TV.
VCR Sets the remote to control most RCA VCRs.
Lightbulb (NightGlo) Press to light up the remote control buttons. The light
will go off after five seconds.
DISPLAY Press to display the time and channel number on the screen. Press
to see if the Sleep Timer and/or Alarm Timer is set. Press to remove menus
from the screen.
SLEEP Button Sets TV to automatically turn off in 30, 60, or 90 minutes.
MUTE Button Press to quickly reduce sound to minimum level. To restore
sound and normal picture, press MUTE again or press VOL up.
PREV CH Button (Previous Channel) Pressing this button switches the TV
back to the last tuned channel. This is useful if you are watching two
channels. Select the first channel you wish to watch. Then select the other
channel by pressing two number buttons. The TV changes back and forth
between the two channels each time you press this button.
CHAN
^
and v Buttons (Channel Up and Down) Press to select the next
higher or lower channel in memory. You can add or erase channels in
memory as desired. When a menu is displayed, CHAN ^/v allows you to select
and adjust menu controls.
VOL < and > Buttons (Volume Down and Up) Press VOL > to increase
volume, or press VOL < to decrease volume. The volume display appears on
the screen when you press the VOL buttons. Also, press > or < to adjust the
setting of an item that is highlighted in a menu.
CLEAR Clears menus and displays from the screen.
MENU Button Brings up the Main menu. When in the menu system, it
selects highlighted items. Also returns you to the previous menu.
S
K
I
P
S
P
E
E
D
OFF
REW PLAY FF
REC STOP PAUSE
DISPLAY
SLEEP
MUTE
PREV CH
123
456
789
0
TRACK F.ADV
CLEAR MENU RESET
-
TV
VCR
+
C
H
A
N
V
O
L
C
H
A
N
V
O
L
S
E
A
R
C
H