RCA L46WD250 Flat Panel Television User Manual


 
Graphics contained within this publication are for representation only.
36 Chapter 4
Chapter 4: Using the TV's Menu System
Using the Menu System
This section explores the menus of your TV. Each menu is outlined and
detailed to help you get the most from your TV. The Parental control
menu is discussed in the Features chapter.
To access the menu system:
1. Press the MENU button.
2. Use the up and down arrow buttons to highlight an option and
press OK to display it. The name of the menu is displayed at the
top of the menu screen.
3. Press the up and down arrow buttons to move to a different option
within the menu. If necessary, press the OK button to display the
choices of the option you’ve highlighted. If available, use the text
at the bottom of each screen for help.
4. To return to the Main Menu, press the MENU button until it's
displayed.
Note: Options in the menus that are grayed-out and can't be
highlighted are unavailable or in progress.
Descriptions of each menu are discussed in the order they appear.
There are two ways to exit a menu:
• Press the CLEAR button. The menus are cleared from the screen and
you return to TV viewing.
• Press the MENU button repeatedly until the menus disappear.
Channel List Menu
The Channel List menu allows you to view all the channels available
in your channel list. Press the up or down arrow button to highlight a
channel then press OK to tune to the channel and exit the menu.
Sound Menu
The Sound menu lets you adjust audio output. To access the Sound
menu, press MENU on the remote, and then select Sound from the
Main Menu. The following audio items can be adjusted:
Equalizer The ve-band graphic equalizer lets you adjust the audio
frequency settings. You can select one of the fi ve-band Equalizer
Presets or create your own personal preset.
Sound Preset Allows you to choose a specifi c sound preset.
Press the right arrow to cycle through the options: Standard,
Movie, Voice, Music and Personal.
Frequency Range Displays the different graphic equalizer
bands set for each Sound preset option. Choose a band and make
adjustments. When you make adjustments, the Sound preset option
automatically changes to Personal. Press the left or right arrow
button to select the frequency (100Hz, 300Hz, 1kHz, 3kHz, 10kHz)
you want to adjust. Then use the up or down arrow button to
adjust the level. When you're done adjusting the levels, press the
MENU button to exit.
Exit
Channel List
Sound
Picture
PIP
Setup
Parental Control
Time
USB Device
Main Menu
TV
Go back
Equalizer ...
Sound Type Stereo...
Sound Mode Normal...
Dynamic Bass Medium...
Balance
Auto Volume Level
Internal Speakers
Headphone Settings ...
Advanced Settings ...
Sound