Filter
Top Products
Retrieving Codes
1. Press and hold CODE SEARCH
until the INDICATOR LIGHT
lights, then release CODE
SEARCH.
2. Press and release the device
button for the device’s code
you are retrieving (TV,
VCR/DVD, or DBS/CABLE).
The INDICATOR LIGHT will
blink once then remain lit.
3. Press and release CODE
SEARCH. The INDICATOR
LIGHT will turn off.
4. Starting with 0 on the keypad,
press the number buttons in
order (0-9) until the
INDICATOR LIGHT blinks.
5. The number which causes the
INDICATOR LIGHT to blink is
the first digit of your code.
6. Repeat step 4 until you have
retrieved all three numbers in
the code.
If you need to find the three-digit code for your TV, VCR, DBS,
DVD or Cable Box after your device is set-up using Code Search,
use this procedure.
(BLINK)
INDICATOR
LIGHT
(OFF)
(BLINK)
Programming With Code Search
1. Turn on the device you wish
to program.
2. Press and hold CODE SEARCH
until the INDICATOR LIGHT
lights, then release CODE
SEARCH.
3. Press and release the device
button for the device you are
programming (TV, VCR/DVD or
DBS/CABLE). The INDICATOR
LIGHT will blink once then
remain lit.
4. Press and release OFF/ON until
your device turns off.
Important: You may have to press
OFF/ON up to 200 times.
5. When your device turns off,
press the ENTER button, the
INDICATOR LIGHT will go off.
If your TV, VCR, DVD, or Cable Box does not respond after you
have tried all the codes for your brand, or if your brand is not
listed, try searching for your code by following the steps below.
(BLINK)
INDICATOR
LIGHT
(OFF)
109
ENTER
CODE
SEARCH
OFF/ON
CODE
SEARCH
CODE
SEARCH
0
9
…
DVD Code List
Aiwa ......................................................350
Hitachi ..................................................351
JVC ..............................................161, 352
Konka............................................353, 354
Magnavox ............................162, 356, 357
Mitsubishi..............................................163
Panasonic ............................................355
Philips ..................................162, 356, 357
Pioneer..................................................165
ProScan ................................................160
RCA ......................................................160
Sanyo....................................................359
Sony......................................166, 360, 361
Toshiba..................................167, 362, 363
Zenith....................................................364
DBS/
CABLE
VCR/
DVD
TV
DBS/
CABLE
VCR/
DVD
TV
Programming For DVD
Follow same instructions for programming VCR but use
DVD code list.
DVD CODE
The DVD codes are
programmed using the
VCR/DVD key.
RCU300 Manual 12/11/01 11:51 AM Page 10