Filter
Top Products
Perhaps the location forthe antenna is not good.Usethe tall beamed
antenna can be improvedquality of the display image.
Operate the remote directto the remote sensor onthe TV.If still no
response for theTV, please check if theplastic bag on the remotetake or
not.And checkif the locationfor the battery is correct.Changethe new
battery.
The TV willshift to the STAND BYif no response from theremote in the
few minutes.
Please check if thedisplay cable connect to theVGAcorrecte .
Please check if therehas the bend on thedisplay cable.
Enter the main menu,Use the clock regulator forthe Video displaynoise
to eliminate the verticalline.
Adjust theAudio sound horizontalin the main menu toclear the horizontal
ripping line.
Adjust the contrast ratioor brightness in the mainmenu.
No Power
Check theAC cord of TV is plus inor not. If still nopower, please
Pull out the plugand replug in after60 seconds.And open the TV
again.
Signal receive
not properly
No picture
Video isok ,but
without audio
Increase contrast and brightness.
Audio is ok, but
color error or no
picture.
snow statics
picture and noise
Check the antenna atthe back ofTV is connected or not.
Level broken line
Maybe has electrical applianceinterfere, such as hair drier, vacuum
cleaner and so on,please turn off these kinds ofelectrical appliance.
Dual-Image or
"simulacrum"
The TV no
response with
the Remote.
NO Video In.
(PC Mode)
Vertical twinkling
(PC Mode)
horizontal ripping
(PC Mode)
The screen is too
bright or too dark
(PC Mode)
To cause doubleimage or phantom ifthere has high building orhigh
mountain round -TV.You can adjust image effect by manually
operation: consult instruction ofvernier regulation or change thedirection
of external antenna.
If you use theindoor antenna . under certain circumstance, receive will be
more difficult .So you canchange the direction of theantenna to adjust the
image effect . If can't change image receivingeffect either , you have to
use external antenna.
Check the antenna atthe back of TV isconnected properlyor not.
Try to select otherchannels and check whether theTV problem itself ornot.
Increase the volume.
Check theTV is in mute modeor not , and pleasepress the mute
button to make soundresume.
PC Function no
response
Check the computer settingin the state of compatibledisplay resolution
Ripping line in
RCAconnecting
Please use good qualityconnecting cable.
Unplug the power cableand wait for 30 seconds,then connect.If there is
some problem with ourTV, do not repairit by yourself, please contactwith
the customer service center.
Problem still
exist
Note: Therewill be complete picture and thebrightness will come downif the TV
is in the staticpicture for too long time,So please do not keepthe TV in astate of same
Menu or same picturethat has much difference in brightnessand contrast ratio for too
long time.
HELP
18