Filter
Top Products
12
Playing a Tape
Playback
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TVÕs video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
The VCR automatically turns on. The POWER and VCR indicators light. The
tape automatically begins playback if the safety tab on the cassette has been
removed and the AUTO PLAY feature is turned on.
3. Press PLAY on the remote or the VCR, if necessary.
4. Press TRACKING up or down on the remote or the VCR to remove any streaks
from the picture if necessary. Details are on page 16.
5. Press STOP•EJECT on the VCR or STOP on the remote.
6. Press REW on the VCR or the remote.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback.
Power Off
If you press POWER while a tape is rewinding, the VCR turns off automatically
when it is completely rewound. REWIND
➛POWER OFF is displayed on the TV
screen.
7. Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
CHANNEL
REW PLAY
FWD
RECORD
POWER
STOP•EJECT
PAUSE
TV•VCR
TRACKING
POWER VCR TIMER RECORD
Safety Tab