Filter
Top Products
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
10
Setting Up the VCR
Startup
10. Set the time and date.
The TIMER indicator on the VCR front panel flashes until the
time is set.
A. Press MENU on remote to display the VCR MAIN MENU.
B. Press 2 to display the TIME menu.
C. Press 1 to display SET TIME AND DATE.
D. Enter the time and date with the number buttons on the
remote.
¥ Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a time
of 5:07. Press 1 for AM or 2 for PM.
¥ Press CLEAR on the remote to change incorrect entries.
E. Press MENU to start the clock.
F. Press 0 twice to exit.
The time and date appear on the screen when you press
DISPLAY.
11. Set the Automatic Daylight-Saving Time
Select this feature if you want the VCRÕs clock automatically to
advance one hour in April and reverse one hour in October.
A. Press MENU on the remote to display the VCR MAIN MENU.
B. Press 2 to display the TIME menu.
C. Press 2 to select AUTO DST: ON or OFF.
¥ Select ON if you want the VCRÕs clock to automatically
adjust for Daylight Saving Time.
¥ Select OFF if you do not want the VCRÕs clock to
automatically adjust for Daylight Saving Time.
In the Spring, daylight-saving time begins on the first
Sunday in April. Clocks are set forward one hour.
Because the clock automatically changes from 2:00 AM to
3:00 AM, keep in mind that any part of a scheduled Timer
Recording that falls between these two times is not
performed.
In the autumn, daylight-saving time begins on the last
Sunday in October. Clocks are set back one hour.
The VCR clock automatically changes from 2:00 AM to
1:00 AM. Therefore, it can affect your recording length.
TIME
1 SET TIME AND DATE
SET TIME AND DATE
TIME --:-- --
(HH:MM)
DATE --/--/--
PRESS MENU TO CANCEL
SET TIME AND DATE
TIME 09:39 AM
DATE 08/04/96 SUNDAY
PRESS CLEAR TO CORRECT
PRESS MENU TO SET
TIME
1 SET TIME AND DATE
2 AUTO DST: ON
0 EXIT