Filter
Top Products
6
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
IN FROM
ANTENNA
OUT TO TV
Playback
VCR
Recording
VCR
RF Coaxial Cable
(supplied)
RF Coaxial
Cable
From Antenna, Cable
or Cable Box
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
Audio/Video
Cables
or
IN FROM
ANTENNA
OUT TO TV
CH
3 4
INPUT
AUDIO VIDEO
OUTPUT
AUDIO VIDEO
CH
3 4
INPUT
AUDIO VIDEO
OUTPUT
AUDIO VIDEO
IN FROM
ANTENNA
OUT TO TV
From Antenna, Cable
or Cable Box
Playback
VCR (only)
Audio/Video
Cables
Recording
VCR
RF Coaxial
Cable
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
Audio/Video
Cables
or
IN FROM
ANTENNA
OUT TO TV
CH
3 4
INPUT
AUDIO VIDEO
OUTPUT
AUDIO VIDEO
CH
3 4
INPUT
AUDIO VIDEO
OUTPUT
AUDIO VIDEO
Option A hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CH3 CH4 switch on the playback
VCR to either channel 3 or 4.
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5.
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation —
use of TV•VCR button not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
3. Plug in power cords of VCRs and TV.
4.
You will select the audio/video input (L1 or L2)
on the recording VCR to receive the signal from
the playback VCR.
Continue to page 7.
Continue to page 7.
B
A
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.