RCA VR704HF VCR User Manual


 
68
Appendix: reference
Front Panel Diagram
AUDIO (LEFT MONO, RIGHT) and VIDEO INPUT Jacks Receives signals from another
component, such as a VCR or camcorder, when connected through these jacks. to record
from these jacks, use the INPUT button on the remote control to select L2.
CHANNEL TRACKING Up/Down Selects next higher or lower channel in the VCRs
channel memory. When a tape is playing, these buttons adjust tracking. Press both
buttons at the same time to recenter tracking.
FWD Forwards the tape when the VCR is stopped. Searches the picture forward during
playback. Starts slow motion during play-pause and increases slow-motion speed.
INPUT Toggles between the VCRs video input channel and regular antenna/satellite
connections. To view the broadcast from an external device (such as a camcorder)
connected to the VCRs audio/video jacks, tune to the VCRs Video Line Input.
PLAY/PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording
to prevent recording of unwanted scenes.
POWER Turns the VCR on or off. The power button glows at all times, even when the
VCR is turned off.
RECORD Starts VCR recording. Also used for Express Recording (XPR).
Remote Sensor Receives signals from the remote control. Aim the remote at this
sensor.
REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during
playback. Starts slow motion during play-pause and decreases slow-motion speed.
STOPEJECT Stops normal VCR functions such as record, playback, rewind, fast-forward,
and pause. Ejects the tape when the VCR is stopped.
TAPE SPEED Selects a recording speed (either SP or SLP).
Transmitter Transmits signal to a compatible remote-controllable cable box or digital
satellite receiver.
TVVCR Switches the picture signal so that it either comes from the VCR or the cable/
antenna system.
POWER
TAPE SPEED
INPUT
TVVCR
VIDEO
INPUT LEFTMONO RIGHT
VIDEO
P
L
A
Y
P
A
U
S
E
REV FWD
STOPEJECT RECORD
CHANNEL
TRACKING
Remote Sensor