Filter
Top Products
8
Settings Menu
Select on the Settings menu to access the options in this menu.
You can use the Settings menu to change the:
• Expiratory Pressure Relief (EPR) settings – see page 6.
• Mask type – see page 3.
• Tube length
Scroll to TUBE LENGTH and select .
Press or until you see the setting that you require.
• Front cap
You can set up your device to use the front cap accessory.
Scroll to HUMID and select .
Press or until you see the setting that you require.
• SmartStart settings
SmartStart enables your device to start automatically when you breathe into the
mask.
Scroll to SMARTSTART and select .
Press or to change the option to ON or OFF.
• Leak alert settings
Leak alert indicates when a high mask leak is present.
Scroll to LEAK ALERT and select .
Press or to change the option to ON or OFF.
Results Menu
Select on the Results menu to access the options in this menu.
You can use the Results menu to view the total number of hours of treatment (USED
HRS) and the number of sessions that the S8 AutoSet II was used in a usage period
(USAGE).
Note: Your clinician may have customized your device to display Smart Data. Contact
your clinician for further details about Smart Data.
Options Menu
Select on the Options menu to access the options in this menu.
You can use the Options menu to change the language setting. Scroll to LANG and
select . Press or until you see the setting that you require.
Servicing Menu
Select on the Servicing menu to access the options in this menu.
You can use the Servicing menu to view the device system information.