Filter
Top Products
-If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code.
-To search for the code for another device follow the instructions above only press the appropriate device key instead of
TV during step 2. -If the original remote control of your Video recorder or DVD player does not have a POWER key, press
PLAY instead of POWER during step 5.
Code blink out
Once you have Set-Up your FOCUS 3-MODE, you can blink back your Set-up Code for future reference.
(Example: to blink out your television code):
1. Press the TV key once.
2. Press and hold down SHIFT until the red light blinks twice (the red light will blink once then twice).
3. Press 9 9 0. The red light will blink twice.
4. For the first digit of your four-digit code, press 1 and count all the red blinks. If there are no blinks, the digit is “0“.
5. For the second digit of your four-digit code, press 2 and count all the red blinks. If there are no blinks, the digit is “0“.
6. For the third digit of your four-digit code, press 3 and count all the red blinks. If there are no blinks, the digit is “0“.
7. For the fourth digit of your four-digit code, press 4 and count all the red blinks. If there are no blinks, the digit is “0“.
Now you have your four-digit code.
-To blink back the code for your other devices, press the appropriate device key during step 1.
Quick Code Reference
Make sure you write down the codes for your devices in the boxes below and in the battery compartment for
future easy reference.
Device Type 1 …………………………………… 2 …………………………………… 3……………………………………
Volume Punch Through
You may be able to use some functions of your Television, DVD player or the set top box at the same time.
For example: if you are watching a program on your DVD player, you can adjust the volume (a TV function) without
pressing the TV mode key on your FOCUS 3-MODE. The table below lists some of the possibilities.
Last Device Mode Key Pressed:
You Can Control: STB TV volume up and down, mute DVD TV volume up and down, mute
To punch through to TV volume while in the DVD or STB mode:
1. Press and hold SHIFT until the red light blinks twice.
2. Press 9 9 3.
3. Then press the TV key and the red light will blink twice.
To cancel the “Volume Punch Through” per mode:
(Example: to cancel the “Volume Punch Through” for the DVD mode)
1. Press DVD once.
2. Press and hold down the SHIFT key until the red light blinks twice.
3. Press 9 9 3.
4. Then press the Volume (-) key and the red light will blink four times.
Example: being in DVD mode, you will be able to control VOL+/-or MUTE functions of your DVD (provided it has volume
control).
To cancel the “Volume Punch Through“:
1. Press and hold SHIFT until the red light blinks twice.
2. Press 9 9 3.
3. Press the Volume (+) key and the red light will blink four times.
Real Time Macro
You can program your UNIVERSAL FOCUS 3-MODE to issue a sequence of commands at the press of one button. For
example, you may want to turn off your TV, DVD and the set top box at the same time. Any sequence you regularly use
can be reduced to one keystroke for your convenience. A key that is programmed with a Macro works through all modes
(provided it is accessible in that mode). You can install a Macro on any key except for the Mode keys and SHIFT key.
4