Roberts Radio C9950 VCR User Manual


 
Recording from a radio
Your cassette recorder can record from any radio that has a 3.5mm
headphone or line out socket. Recording from other types of socket is
possible using adaptors available from your local dealer.
1. Press the Stop/Eject button to open the cassette compartment.
Insert a cassette with the tape facing towards you and the side on
which you wish to record uppermost. Close the cassette compartment.
2. Ensure that the Timer and Voice activated switches are set to the
'Off' position.
3. Set the Speed switch to the required position. Reset the Tape
counter if desired.
4. Switch on your radio and tune in to the station you wish to record.
Adjust the volume to normal listening level.
6. Plug one end of the supplied Red patch cord into your radio line out
or headphone socket and the other end into the Line In socket on
your cassette recorder.
7. Press the Record button to commence recording, the Recording
indicator will flash.
8. Adjust your cassette recorder's Volume control to suit your
requirements. The recording level is set automatically and is not
affected by the setting of the Volume control.
9. To stop the recording press the Stop/Eject button.
9