Roland A-70 Universal Remote User Manual


  Open as PDF
of 2
 
®ÂØÒňÎ
®
A-70
Expandable C0ntroller
TurboStart
TBS71 © 1999 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20068 Page 2
Viewing Patch Names of External
Devices
The A-70 allows you to display Patch Names for
many devices using bank select MSB and LSB
messages.
Use the following procedure to display the Patch
Names for the Roland SC-55:
1. Double-click the EDIT button.
2. Type 0,2 on the 10-key pad and press ENTER.
3. Under ZONE, press EXT A so that it is lit.
4. Use the INC/DEC buttons to select #6 (SC-55).
5. Press EDIT so it is off.
6. Under DESTINATIONS, press EXT.
7. Under PARAMETER SELECT, press BANK
SELECT.
8. Cursor up to display BM in upper the left corner.
9. Cursor left to select ZONE A.
10. Press 0 on the 10 Key pad.
11. Cursor down to display BL in the upper left
corner.
12. Press 0 on the 10 Key pad.
13. Under PARAMETER SELECT, press PGM
CHANGE.
14. Use the INC/DEC buttons to select the desired
Tones. The Tone names will be displayed.
Soloing Zones / Outputs
Use the following procedure solo a Zone or Output:
1. Double click the desired ZONE or OUTPUT
button.
2. Double click a second time to return to the
previous settings.
 previous