Roland M-1000 Projection Television User Manual


  Open as PDF
of 2
 
Digital Powered Monitor
PC
S/PDIF OUT USB AUDIO
Output
S/PDIF OUT
S/PDIF OUT
S/PDIF OUT
Tu rntable
Synthesizer
A.IN
D.IN1 D.IN2 D.IN3
Phono
EQ
Tur n Ta bl e
POWER
LEVEL
0
1
2
3
4
5
6
7
8
9
Mic Preamp
Sound Module
Cascaded Setup
Word Clock
Example Setup
Mix Multiple Digital Sources with Professional Quality!
Today's synthesizers, sound modules and recording gear
often feature digital outputs, but musicians have never had a
way to mix all these sources at once. That's where the M-1000
comes in. This 1U rackmount mixer can mix up to four stereo
digital signals of varying sample rates—along with a stereo
analog input and digital audio from a PC—with professional
24-bit/96kHz sound quality.
Take a look at the back panel, and you'll find four S/PDIF
digital inputs and a stereo analog input with high-quality A/D
converters. That's a total of 10 input channels that can be
mixed—regardless of sample rate—using the front-panel
knobs. The result can be output via coaxial and optical digital
outputs or the M-1000's analog Master and Monitor outputs.
USB Port for PC-Based Recording
The M-1000 even lets you integrate your USB-equipped PC
into the mix. Using a USB cable, you can route digital signals
from a computer into the M-1000, where they can be mixed
with other input channels. The results can then be sent back
out to the computer for recording. The M-1000 supports
sample rates up to 96kHz—even via USB*—so there's never
been a better or easier solution for computer-based recording.
Flexible Sync Options and Expandable Design
With its Word Clock input and output, the M-1000 can be
easily integrated into professional studios. The clock source
itself is selectable among Internal, Word Clock, Digital In and
USB* for maximum flexibility. And with its pro-quality
specs—including pristine 24-bit/96kHz AD/DA converters and
56-bit internal processing—the M-1000 can be used in a range
of applications from home studio setups to world-class
recording and editing suites. Best of all, multiple M-1000s can
be cascaded for situations when additional inputs are
required.
*At 96kHz, it is not possible to send audio in and out simultaneously via USB.
Roland Corporation U.S.
5100 S. Eastern Avenue, P.O.BOX 910921
Los Angeles, CA 90091-0921
Phone: (323) 890-3700 Fax: (323) 890-3701
Visit us online at www.RolandUS.com
All specifications and appearances are subject to change.
All trademarks are the property of their respective companies.
Printed in Japan September 2002 RAM-3622 ERK-NK C-4
* This product was tested on ordinary computers based on the requirementsabove. However, Roland cannot
guarantee all functions even if the aboveconditions are met. This is because the processing power of
computers can differ even with the same specs; a result of differences in designconcepts and operating
environments.
■Specifications ■Block Diagram
■System Requirements
OS
Computer
CPU/Clock
Memory (RAM)
Hard Disk
Microsoft Windows 98/98SE/ME/2000/XP
Windows compatible computer with a USB connector
Pentium processor 400MHz or higher (win98/SE/ME)
Pentium processor 500MHz or higher (win2000)
Pentium processor 600MHz or higher (winXP)
64MB or more
120MB or more
OS
Computer
CPU/Clock
Memory (RAM)
Hard Disk
MacOS 9.0.4 to 9.2.2
Apple Macintosh series with on-board USB Test Studied on iMac, Power Mac G4,
Power Mac G4 Cube, and iBook.
PowerPC G3/300MHz or higher
128MB or more (Application memory 32MB or more)
120MB or more
Windows
Macintosh
Signal Processing
Sample Rate
Analog Input
Digital Input
Analog Output
Digital Output
USB Connector
Word Clock Terminal
Indicators
Power Supply
Power Consumption
Dimensions
Weight
Accessories
AD Conversion:
DA Conversion:
DSP Processing:
Connector:
Input Level:
Maximum Input Level:
Connector:
Format:
Digital Audio Input:
Connector:
Nominal Output Level:
Connector:
Format:
Number of Bits for Digital Audio output:
Connector:
Input Impedance:
Input Signal Level:
24bits, 64 times over sampled, delta sigma
24bits, 128 times over sampled, delta sigma
56bits
96KHz,48KHz,44.1KHz
1/4 inch phone type (unbalanced)
-10dBu. +4dBu (switchable)
+22 dBu
COAXIAL, OPTICAL
EIAL CP-340 TYPEII/Consumer
24 bits
XLR-3-31 type (balanced)
1/4 phone type (unbalanced)
+4dBu (XLR-3-31) Main
-10dBu (1/4 inch phone) Monitor
COAXIAL, OPTICAL
EIAL CP-340 TYPEII/Consumer
24 bits
96 KHz audio signal supported
BNC
75 Ω (terminator on)
TTL Level
PEAK, LOCK, LEVEL METER, CLOCK, SAMPLE RATE
AC117V, AC230V, or AC240V
10W
482 (w) X 167 (D) X 44(H)mm
19(w) X 6-5/8 (D) X 1-3/4 (H) inches
(EIA-1U Rack-mount type)
1.9kg /4lbs 4oz
Owners Manual, Driver CD-ROM, AC Cord, USB Cable
 previous