Roland S-OPT TV Cables User Manual


 
425 Sequoia Drive, Suite 114
Bellingham, WA 98226
WWW.RSSAMERICA.COM
TOLL FREE: 800.380.2580 • FAX: 800.634.8202
















32 x 8 Digital Snake (Redundant)


16










Basic System Example
S-OPT
This system setup is for anyone
needing REAC transmission over 100
meters and up to 2 km (1.2 miles)
Connect an Ethercon cable from
S-1608 Digital Snake to the S-OPT
stage unit. Connect an OpticalCon
or standard optical cable from stage
S-OPT to the FOH S-OPT. Simple
connect an EtherCon cable from the
FOH S-OPT to the M-400 V-Mixing
System console. If you require more
than 2 km in distance you can gain
an additional 100 meters of Cat5e
cable from the stage and FOH
positions giving you a total of 2.2 km
in distance.
This system is a must for anyone
requiring REAC transmissions over
100 meters and requires redundancy.
The S-4000-3208 Digital Snake
has built in redundant REAC ports
so simply connect two S-OPT’s at
the stage and FOH positions. Two
S-OPT units can be connected using
the proprietary POWER LINK cable
(ARC-15, sold separately) so that
redundant power can be supplied
from one unit to the other. If power to
a single unit is interrupted due to an
unexpected situation or is damaged,
both units will still continue to operate.