Filter
Top Products
Operation
Crystal Series LCD Installation/Operation Manual 29
PRE
L
IMINAR
Y
4.4
Using the On-Screen
Menus
To use the on-screen menus:
1. Press MENU to display the Main Menu.
2. To select a menu item, use the up- or down-arrow buttons ( , ) on the remote
control to highlight it.
3. Press ENTER or the right-arrow button ( ) to access that menu.
4. Use the up- or down-arrow buttons ( , ) to select the setting you want to change.
Then, press ENTER or the right-arrow button ( ).
5. Press the right- or left-arrow button ( , ) to change that setting.
6. To return to the previous menu, press MENU or ( ).
The Crystal Series LCD OSD menus are arranged hierarchically, as shown in Figure 4-1.
Depending on the selected input source and/or signal characteristics, some menu options
may not be available.
1. The maximum available resolution and vertical frequency is
1920x1200/60Hz or the maximum supported by your video
card, whichever is lower.
2. The Crystal Series LCD supports 30-bit color (1,073,741,824
possible colors).
Note